Different types of powder tanks for different uses
For the selection of powder and material transportation vehicles , it is better to choose the best. We need to choose according to demand before we can buy the favorite. The powder and material transportation vehicles choose different tank types according to different usages, and finally choose The purchased product will be the one we like.
The powder material transporter can be divided into the following four types according to its tank type:
1.Vertical powder and material transporter
The centerline of the tank body of the vertical powder material transporter is vertical. Vehicles can carry one or more vertical tanks. The vertical powder and granular material transport vehicle has a wide range of applications and can be used for bulk transportation of powder and granular materials such as powder and granules. However, the vehicle has a high center of mass, and the structure is complicated when multiple tanks are used, and the manufacturing cost is also high.
2.Horizontal powder material truck
The tank centerline is horizontal. The tank can be a single tank or two tanks separated. If the fluid bed in the tank forms an inclination with the horizontal plane, it is called an inward horizontal granular material transport vehicle. If the center line of the tank body and the horizontal plane form a small inclination angle, it is an outward tilting type powder material transporter. The horizontal powder and granular material transport vehicle has the advantages of simple structure, convenient operation, stable discharging performance and low center of mass, but its applicability is limited, and it is generally only used for bulk transportation of powder with good fluidization performance.
3.Lifting powder material transporter
During loading and driving of the lifting type powder material transportation vehicle, the center line of the tank body is in a horizontal position, and the unloading mechanism lifts the front end of the tank body into an inclined state during unloading. The bottom of the tank of the lifting type powder material transport vehicle is usually provided with a fluidized bed only at the discharge port. The unloading feed tank is inclined. The powder particles automatically slide under the gravity and start to concentrate on the discharge port. After closing and unloading. Therefore, the internal structure of the tank is simple, the volumetric efficiency is high, and the application range is wide. It is often used to ship powders with poor fluidization performance. However, due to the increase of the lifting mechanism, the use and maintenance are complicated.
4. Bucket type powder material transporter
The tank body of the bucket type powder tank automobile is composed of a straight cylinder or a rectangular cylinder whose center line is horizontal and a cone cylinder which is perpendicular to the center line. Bucket type powder and material transportation vehicles usually do not have a fluidized bed, and the gravity of the powder is automatically discharged. Therefore, it has a simple structure and a wide application range. The remaining amount is small and the tank is easy to clean.